Wargame-model-mods - MDF buidlings - Also stocked by minibits

[nikharwood]

Very cool... I don't need any of this, but it's very cool indeed

[paulr]

Very cool... I don't need any of this, but it's very cool indeed

And when has that stopped you

[nikharwood]

And when has that stopped you

That's a fair point, y'know

[Wargame Model Mods]

The 7th stretch goal has been unlocked

www.kickstarter.com/projects/wargame-model-mods/maze-of-the-dead-by-wargame-model-mods

7. Defence drones

unlocked

Add £12 to pledge

contains 2 small and 2 large drones





13. Troop platform

unlocks at £12500

Add £12 to pledge

Covers 3x3 squares, and can be placed next to walls

Versions for each style view them all below

http://www.wargame-model-mods.co.uk/stretchgoals13.html



I am also working on some add-ons that will be added shortly, these are things such as ramps, stairs, and some other bits and bobs

[toxicpixie]

Apropos of nothing, could you do something approaching the "gateway" piccies on the link below?

I quite fancy some glowing gateways...


https://m.facebook.com/Sergei118/posts/pcb.1784831255094449/?photo_id=10206728380343581&mds=%2Fphotos%2Fviewer%2F%3Fphotoset_token%3Dpcb.1784831255094449%26photo%3D10206728380343581%26profileid%3D566498897%26source%3D48%26refid%3D18%26ref%3Dm_notif%26notif_t%3Dgroup_comment_reply%26cached_data%3Dfalse%26ftid%3Du_u_0&mdf=1

[Wargame Model Mods]

Apropos of nothing, could you do something approaching the "gateway" piccies on the link below?

I quite fancy some glowing gateways...


https://m.facebook.com/Sergei118/posts/pcb.1784831255094449/?photo_id=10206728380343581&mds=%2Fphotos%2Fviewer%2F%3Fphotoset_token%3Dpcb.1784831255094449%26photo%3D10206728380343581%26profileid%3D566498897%26source%3D48%26refid%3D18%26ref%3Dm_notif%26notif_t%3Dgroup_comment_reply%26cached_data%3Dfalse%26ftid%3Du_u_0&mdf=1

that's a great idea, i could use them as teleports to move around the table quickly

[toxicpixie]

I thought they might spark thought

[Wargame Model Mods]

I thought they might spark thought

defiantly, you will probably see the result in about a week

[Wargame Model Mods]

Hello everyone

The first batch of changes are here from the feedback and suggestions.

www.kickstarter.com/projects/wargame-model-mods/maze-of-the-dead-by-wargame-model-mods

There are two minor changes to the tiles.

The first one is the ability to add wiring under the boards for those of you who want to connect all the lights to a mains power supply.
The addition of two squares on each side of the tiles that are held in place with tabs allow you to do this, and means those of you who do not want to do this can leave them in place.
For those wanting to add wiring, you would simply cut the tabs and clean up the hole with a file or scalpel you can then fit wires up to 4mm under the tiles.





The second change relates to the second shape seen in the above pictures, again it is optional.  By removing this section you can now fit in a small connector sections to hold your separate tiles together



Connectors in place, at the end of each connector are some rounded bumps which slot into the underside of the tiles, the round shape help them find the locators on the tiles and slot quickly into place.
The connectors allow for a slight amount of give for ease of set up but will prevent you from knocking your tiles apart



Above one of the connectors below slotting a second tile onto connectors



Below are pictures of the tiles upside down, you can see the square cut out for wire to pass through and the slots for the connectors and in the second picture are the connectors in place.





I will be providing two free connectors for each board you have pledged for.

Finally i have been asked a couple of time how the lights fit in place, here is a picture of an internal part inside the tiles, the wire slots into the cut outs with the LED sitting on the protruding piece of wood in the middle.



Tomorrow i will be adding the first sets of add-ons these are all inspired by suggestions and ideas from my backers, if you have any thing you would like to see please suggest it.
There will be 8 coming tomorrow, most of them relating to access such as ramps and stairs. None of them will need unlocking and they will all be cheap around the £5 mark per set / item

[toxicpixie]

Brill, look forward to the teleport gates and nice ideas on the Kickstarter!

[Wargame Model Mods]

Here are the first 8 add-ons, these are all responses to ideas and feedback so if you have any suggestions please let me know.

http://www.kickstarter.com/projects/wargame-model-mods/maze-of-the-dead-by-wargame-model-mods

https://www.facebook.com/wargamemodelmods

http://www.wargame-model-mods.co.uk/mazeofthedead.html







There are 5 sets of these walkways.

Set One 3 single walkways, 2 double walkways, 1 triple walkway and 2 entrances


Set Two 1 triple walkway and 2 quad walkways


Set Three, 1 corner, 1 T junction and Crossroads


Set Four, 1 Bridge section and 2 End sections


set Five, 4 end sections


These sets are £5 each or 4 for £15

[Wargame Model Mods]

Here is a closer look are the Area 51 gaming board currently on the Maze of the dead kickstarter.

www.kickstarter.com/.../maze-of-the-dead-by-wargame-model-mods - private.

This is a 4x4 foot gaming board using 16 tiles 40 corners and 96 wall sections. you can select this exact set up on the kickstarter, it is the 4x4 Dungeon board.

The theme is that of a human outpost with Gothic style walls, although you can choose to use different walls with these tiles if another set takes your fancy.

There are 6 other designs as well on this project, numerous stretch goals and 8 add-ons.

i would love to hear feedback and suggestions.

[Duke Speedy of Leighton]

Nice

[Techno]

That is just SO zippy. 

Hope you sell shed loads.

Cheers - Phil

[Maenoferren]

Looks amazing