Wargame-model-mods - MDF buidlings - Also stocked by minibits

[Maenoferren]

Please desist from this MDF madness. I don't have anything 28mm left to play with this stuff.... But it is so tempting....

[Wargame Model Mods]

Down to the last 24hours

Final add-on. A set of wide corridors for the lunar out post buildings, three in a set a small airlock and a 75mm corridor and 150mm corridor. They can fit straight up against your buildings or have an airlock bulkhead on the side facing out.


Final stretch goal has been unlock at £23000.
This is the tower to fit on the skypad. It comes with ladders, various detail panels such as fans and grills and 4 barricades high enough to block line of site.
If you have the skypad pledge add £12 for the tower. If you would like both add £29.


I have been asked by a fair few people about a pledge manager. I will not be using one.
This means if there is items you would like on here you need to pledge for them before the time runs out. you will not be able to add after the kickstarter is over.

Regarding post cost, please make sure you have added the charge quoted by kickstarter when pledging or altering a pledge.

If you want to run your pledge past me to check it's correct please do so.


A massive lunar outpost building, featuring plastic windows, doors and optional wall panels, you can choose between having some of them windows or solid panel.
Roof is removable to allow access to inside, this building features a lot of etching work.
Measures 300 x 225 x 135mm


Similar to the above building this is the Quad version and it is huge, featuring plastic windows, doors and optional wall panels, you can choose between having some of them windows or solid panel.
Roof is removable to allow access to inside, this building features a lot of etching work.
Measures 300 x 300 x 135mm



A set of four solar panels that fit nicely onto the lunar outpost buildings, they fit on any of the base walls and the large roof panels, it the actual solar panel can be positioned at 0, 22.5 or 45 degrees.


2 corridors and a mini airlock, corridors are 75 and 150mm long and 45mm wide, perfect for joining the separate building together and providing extra cover. Roofs are removable.



The temporal distortion field now includes a set of steps, it was added to some spare space that would of gone to waste.

[Duke Speedy of Leighton]

You've missed a step! You should have actual solar panels so you can charge up the LEDs!!!

All look brilliant, hope it hits the upper limit.

[Wargame Model Mods]

You've missed a step! You should have actual solar panels so you can charge up the LEDs!!!

All look brilliant, hope it hits the upper limit.

thank you, what a good idea 

[Duke Speedy of Leighton]

Lol!

[Wargame Model Mods]

The Kickstarter was a great success and i managed to turn it around pretty quick.

since then there hasn't been too much new stuff as it took me a while to get it all in stock and set up for sale on eBay etc.

A new version of my draws, extra deep so you can store larger items in them.

the standard paint racks fit on top as normal








available from the 6th of April along with some more new items I will show soon

[Womble67]

Looks very good

Take care

Andy

[Leman]

That looks impressive and would certainly tidy my painting area.

[Wargame Model Mods]

New version of my paint racks to support the Tamiya color paint range and other ranges with large pots up to 37mm in diameter
Holds 36 pots and up to 12 brushes.
Measures 420 x 160mm x 65mm.
It will be available on its own or with either set of my draws from Wednesday






Another new version of my paint rack to support Revell Aqua Color.
it holds 40 Paints and 9 brushes
Measures 420 x 160m x 54mm
It will be available on its own or with either set of my draws from Wednesday








This is the laser fence set
4 long, 4 shot, 4 corners and 2 gates make up this great set.
its fits in perfectly with the other fence systems.
The lasers are made from Perspex with the choice of three colors red, blue and yellow.
long panels are 304mm short are 152 and the corners are 86x86mm
The design for this kit was done by john Morrison

[Wargame Model Mods]

Painted Ingot Factory

This is my ingot factory, it has been painted by Dan Taylor and he has done an amazing job. It has been painted as i imagined the building when i designed it a year ago. The molten metal stored in the Center of the building and slowly making its way down to the ingot molds.
The rest of the building features numerous industrial themed details. Along the walls we have air vents to feed the internal furnace to keep all the metal molten and heat extractors to take away excess heat
At the front of the control tower we have some pipes supplying fuel to heat the metal. (These are included in the kit)
Dimensions are
wide 250mm
depth 290mm
height 106mm

[Steve J]

That's a very nice building with a lovely paint job

[fred.]

Very cool building - not sure I have seen a design like this before.

The painting of the molten metal is great, really makes it look hot.

[Duke Speedy of Leighton]

Interesting

[Wargame Model Mods]

thank you guys,  i am glad you like it

[Womble67]

Looks brilliant

Take care

Andy

[Techno]

Very nice, indeed.

Cheers - Phil

[Wargame Model Mods]

An example of the Tool Factory painted. It has been painted by The Goldfish of Justice.
The building is packed with details and interesting parts.
The entire building is surrounded by a conveyor belt, this belt is raised up on small wheels and a network of detailed supports.
On the belt are a series of tool molds, that are filled with the metal to make the tools, we can see this represented with the how the model has been painted

[fred.]

Another really nice building.

Have you considered offering clear plastic for windows, either plain or possibly engraved?

With such big windows holes it would look good with plastic to make the light reflect off.

[fsn]

Hmm. I think they need a shwubbewy!

Any chance of getting them scaled down to the One True Scale?

[Wargame Model Mods]

Another really nice building.

Have you considered offering clear plastic for windows, either plain or possibly engraved?

With such big windows holes it would look good with plastic to make the light reflect off.

some of them come with a sheet of acetate but not all something i need to add to most the kits