Wargame-model-mods - MDF buidlings - Also stocked by minibits

[Wargame Model Mods]

hello all

A few new buildings to show off. let's start with  the winner of my competition

A design for a industrial tower using pringle tubes.






A large double barracks with a small platform in the centre.
This one was a request from a while ago.

It's a fairly large building at 320mm x 290mm

It is packed with detailed tiles all over the roof and has optional doors / windows.






A large factory/warehouse designed to fill maximum floor space.

Features a removable roof with access to the inside, two large doors allow for medium/small tanks and vehicles to enter the buildings.

The roof has space for a large platform and a chimney stack, which can be placed anywhere

Inside there is a large open room with space for several vehicles or even and objective with several entrance to assault from. There is a balcony which will give line of sight over the battle but sacrifices cover

Measure 295mm x 295mm x 200mm (not including chimneys)

This is a simple kit that will be easy and quick to assemble and has massive scope for customising the interior and exterior








This is the first version of the upcoming Refuse Furnace.

It needs a bit on work on it, to add some more details and make best use of the wood to reduce waste

The building is packed with details and interesting parts.

There are two refuse inputs which are fitted with crushing rollers and hinged doors that can be opened / closed at will

The roof features a ventilation system and the side of the building there is a fan assisted fume stack

The building is on a 200mm x 200mm base

[Duke Speedy of Leighton]

Look a lot of fun!
Hope they sell well.

[Wargame Model Mods]

Look a lot of fun!
Hope they sell well.

thank you

[Techno]

What Will said ! 
Cheers - Phil.

[paulr]

Nice, love the 'reuse' aspect of the competition winner

[petercooman]

Looks splendid, really like the factory!

[Wargame Model Mods]

thank you all for your comments

[fred.]

I like the first and last ones. Nice looking, different shapes, and some good detailing.

On the factory - its a bit basic. I know you suggest it is good for adding detailing - but I think a lot of people would be happy to buy that detailing. One of the biggest problems with MDF buildings is stopping them looking like flat sided boxes. I think perhaps having two versions of this - a basic one, as shown. And a detailed one with lots of extra bits to break up the flat sides.

Have you tried adding card parts to your kits? Sarrisa do this with window frames and arches to go around doors etc - the range Leon carries from the states does this too. It allows you to add some extra bits which are thinner than MDF (and presumably cheaper too).

[Wargame Model Mods]

thanks for the comments fred. i shall have a think on it. using card has been a thought i have had before but decided against it due to added complexity of produciton

[Wargame Model Mods]

This is my new power plant this is a finished version of it, its following my new industrial style buildings.
This is a large detailed building 260mm x 260mm x 170 (excluding chimneys)
It features are large generator on the side of the building that rotates freely. This part is very detailed and has an optional warning plate and details.
The rest of the building is packed with details that can be placed freely.
The roof has a large open balcony perfect for defence guns
This kit is the first to feature pipes as standard. it has to sections of pipes for extra details







An ork teleporta, this was and entry in my competition and won second place
This is a highly detailed compact building with a few construction options.
The barriers around the edge of the platform are optional along with all the detailed panels
The portal can be taken down for easy storage.
The platform is large enough to hold an Ork Trukk or a large squad
Dimmensions
wide 180mm
depth 290mm (including ramp)
height ~180mm (depends on position of skull on the portal)





next we have a small barracks that was a request.
The model is a good piece to use several scenarios such as capture and hold, attack and defend or just a basic annihilation game
The door / windows on each end of the barracks can be covered over of left open
Dimensions are
wide 300mm
depth 160mm
height 100mm






Again another request for a double barracks
The model is a good piece to use several scenarios such as capture and hold, attack and defend or just a basic annihilation game
The building features a platform in the centre can be left free so it can be positioned in different places each game.
The doors / windows on each end of the barracks can be covered over of left open
Dimensions are
wide 320mm
depth 290mm
height 100mm






This is the final version of the upcoming Rubbish Furnace a lot of detail has been added to it
It needs a bit on work on it, to add some more details and make best use of the wood to reduce waste
The building is packed with details and interesting parts.
There are two refuse inputs which are fitted with crushing rollers and hinged doors that can be opened / closed at will
The roof features a ventilation system and the side of the building there is a fan assisted fume stack
The building is on a 200mm x 200mm base.





A brand new building from me, The Ingot Factory.
This is one of my most detailed buildings i have produced. It is packed with industrial features.
There is a large tank on top of the building to store red hot metal in which then runs down in to a smaller tank ready to be poured into ingot moulds. This area would look great painted up in reds/yellows using object source lighting techniques to represent the glow of molten metal. Both tanks have an extra piece of wood in them to represent the level of the metal and provide a great flat surface to paint onto. These can the altered in height between two levels
The rest of the building features numerous industrial themed details. Along the walls we have area vents to feed the internal furnace to keep all the metal molten and heat extractors to take area excess heat
it's a decent size at 250mm x 290mm.
At the front of the control tower we have some pipes supplying fuel to heat the metal.






This listing is for one Tech post.  laser cut buildings intended for Warhammer and other 28mm scale table top wargames
A simple building, with a large balcony for positioning your troops on.
All doors and windows can be covered or left open,
The inside can be accessed from underneath via hollow base, or from above if you dont glue the roof on
Dimensions are
wide 300mm
depth 200mm
height 75mm






This is the large hex bunker; this impressive building is highly detailed.
The first one to feature Coloured Perspex
The roof and door can be removed at any time.
It comes with 3 gun variants all of which can be made and a radar dish.
The bunker measures 160 x 290 x 54 mm
The bunker also come the a heap of extra walls / barricades, tank traps and hedgehogs
This building covers a large area very well and would make a great centrepiece for an attack / defend game
And when you are finished you can store all the parts inside out of the way and well protected

[Maenoferren]

Fab looking buildings... The tech post, the furnace and the power plant would look good in an Alien's game

[Duke Speedy of Leighton]

Great buildings.
Love the power plant but I want three more chimneys and an inflatable pig (one for Techno there)!

[fred.]

These are some really nice looking buildings.

Shame they're not in my scale 

[Wargame Model Mods]

thanks all for the comments. glad you are all liking them

[Wargame Model Mods]

This is the Dual silos, it was designed by the winner of my competition and then made into an actual building by me.

For this building you will need to source two Pringle tubes

This building features very detailed floors and railings also comes with several ladders for your troops to use

the Pringle tubes double up as storage containers for dice and other gaming necessities

Dimensions are
wide 304mm
depth 152mm
height 300mm