Wargame-model-mods - MDF buidlings - Also stocked by minibits

[Maenoferren]

Looking good ...

[Wargame Model Mods]

Mineral crusher

The centre of the building has a large open pit with a rotating crushing arm, this is covered by a large grill with two inputs on either side.

The machine is fed by carts which are cranked up the sides by tracks, the carts can be placed anywhere on the tracks and the buckets can be positioned in a tipping position, these buckets would look great if there were filled with fine slate or similar to add to the feel of the building.

There is a control room, the door and windows can be covered as seen or left open.

This building  features black pipes, There are two large section that you can place anywhere and a smaller 2 pipe section to place on top of the grill.

Dimensions are
wide 295mm
depth 295mm
height 80mm

[getagrip]

That's brilliant.

Wish I still played Necromunda!

[Wargame Model Mods]

The water tower, latest in the pringle tube terrain

This building features very detailed floors and railings also comes with ladders for your troops to use to get up top

Dimensions are
wide 152mm
depth 152mm
height 200mm

[Wargame Model Mods]

 Fortified complex

This consist of
6 long fence panels
4 short fence panels
4 corners
1 large gate 2 small gate
18 End wall sections or joiners
8 end details used if you have a wall the does not join another

One set will make up a compound roughly
450mm x 325mm

You can also make it up into a fence of any shape. This could be a long straight fence or one that goes around buildings etc. using the corners

Dimensions are
corners width 75mm x depth75mm x tall 90mm
large walls length 150mm x depth 21mm x tall 90mm
small walls length 75mm x depth 21mm x tall 90mm

[Wargame Model Mods]

 The pipeline kit

This uses 8 card tubes as well as my laser cut wood, these are included in the kit. The kit is packed with detail on the walls and floors, it is pretty simple to construct and can be rearranged each time you use it by not gluing the pipes and floors in place.

This kit is hugely customisable. The sections can be stacked and arranged in anyway with the ability to locate the pipe supports in any location.

The sections can have multiple pipes coming off them. the floors can be arranged on top of the pipes as walkways or on the sides as wall.

There are a bunch of ladders that double up as barriers.

Comes with 4 value sections, that fit directly onto the pipes.

These kits can work in multiples extending the size of the kit

The board this kit is laid out on it 900x600mm so this kit can be arranged to cover a large area, or set up in a more compact nature

Includes

3 rectangle sections
8 floors
3 cube sections
8 pipes
2 corners
various bulkheads, pipe ends etc
Barriers / ladders.

[Womble67]

I really like this I must resist.

Take care

Andy

[Maenoferren]

Looking really good

[Wargame Model Mods]

Thank you 

[Wargame Model Mods]

Thank you

well that is completly the wrong emote.     

[Leon]

well that is completly the wrong emote.     

Edited for you!

[Wargame Model Mods]

video here
https://www.youtube.com/watch?v=P9UWFDguzR8

This is my first kickstarter and I am aim to bring something completely new to the wargaming scene.

I am combining simple electronics with laser cut buildings to bring new eye catching and unique terrain to your tables.

So head over to here to get the full picture and story


https://www.kickstarter.com/projects/wargame-model-mods/integrated-wargame-buildings#project-faqs

[Maenoferren]

Ooooh they look good.

[Techno]

That's a rather spiffy idea ! 
Cheers - Phil

[Wargame Model Mods]

thank you

[toxicpixie]

Kickstarts doing well, I see!

Good luck

[Wargame Model Mods]

In depth look at the promethea pump
One of the three buildings to feature powered movement. The building features dual oscillating arms run from a single motor. The arms are supported on pivots in the centre and strongly anchored into metal ball bearings.
The rest of the working parts are made from plastic to ensure longevity and reliability.

The design allows easy access to the motor, moving parts and battery case.
The entire pump has various detailed sections to it and is housed in a fenced complex.
This building measures 400 x 194 x 162mm.

The building was a particularly fun one to design and was one of my first ideas for this project. The arms are powered by a single motor with dual outputs and 2AA batteries.
The arms can be set at opposites or sync depending on how you build it.
The base is fairly large allowing smaller models to get between the fence and the actual building


so head over to here to get the full picture and story

<a href="https://www.kickstarter.com/projects/wargame-model-mods/1589322754?token=5fe51df0">Wargame -Model-Mods - kickstarter </a>

[FierceKitty]

How about a temple of Dagon with a sinister, glowing fire pit? I'm sure the fantasy people would like it too.

[Wargame Model Mods]

How about a temple of Dagon with a sinister, glowing fire pit? I'm sure the fantasy people would like it too.

cool idea

[Wargame Model Mods]

Here is a look at the first 10 stretch goals, all have been unlocked up to the satellite dish colours. There are more to come with several in development