Pendraken Miniatures Forum

Wider Wargaming => Painting & Modelling => Topic started by: HPFlashman on 24 January 2013, 11:19:14 PM

Title: Starting up in 10mm
Post by: HPFlashman on 24 January 2013, 11:19:14 PM
My first figures in this scale are somewhere in the process of getting here, I was wondering if there are any special considerations for painting up this scale ?

Brushsizes, thinning of paint and that sort of thing. I have Vallejo paints thinned with water and a drop of flow enhancer and use somewhat thinned gesso for priming purposes.

(http://i989.photobucket.com/albums/af18/HPFlashman/GWP3%20WIP/c2d81bcf.jpg)

(http://i989.photobucket.com/albums/af18/HPFlashman/GWP3%20WIP/ac1d6d33.jpg)

This are a couple of shots of my WIPs for VBCW in 20MM. After this I have thinned the paint down a bit more and gotten the flow enhancer... :D

Vallejo on the figures and White Ensign enamel on the Lt`s "little tank"...
Title: Re: Starting up in 10mm
Post by: sebigboss79 on 25 January 2013, 08:16:30 AM
Good job. You will see 10mm just requires rethinking techniques and being a bit bolder and flashier with colours. After all we talk MASSES of figs....
Title: Re: Starting up in 10mm
Post by: GordonY on 25 January 2013, 08:18:31 AM
Only thing I would say about painting 10mm is paint a shade or 2 lighter than you would for 20mm, its a size thing, dont ask me to explain it, but if you paint them in the "correct" colour they'll look too dark.
Title: Re: Starting up in 10mm
Post by: Duke Speedy of Leighton on 25 January 2013, 08:25:45 AM
Ink wash is your friend, invite him round now for drinks and get to know him, you'll be spending an awful long time with him!
Title: Re: Starting up in 10mm
Post by: Steve J on 25 January 2013, 09:03:50 AM
Games Workshop  Devlin Mud wash works for me. Use either neat on browns and beige colours or thinned about 50% with water for others.
Title: Re: Starting up in 10mm
Post by: HPFlashman on 25 January 2013, 06:42:38 PM
Good stuff, fellows.  :-bd

Lighter, brighter and ink, it is then.  :)
Title: Re: Starting up in 10mm
Post by: HPFlashman on 06 February 2013, 06:45:04 PM
Got my delivery today and actually seeing the wee fellows in the flesh, what size brushes do you fellows use ??
Title: Re: Starting up in 10mm
Post by: Duke Speedy of Leighton on 06 February 2013, 06:48:43 PM
2 for base coats, large areas and inks, seriously good 00 for highlights, piping and details.
Title: Re: Starting up in 10mm
Post by: TinyTerrain on 06 February 2013, 07:38:25 PM
For what its worth, as a starting point i would suggest block colours in a slightly brighter shade than normal, then Devlan Mud wash, followed by a highlight of the same base colours. If you want to get fancy then a second highlight in the original colour mixed 50/50 with Vallejo Buff will help lift them off the table.

Also take more care with your basing, with 10mm the base is more obvious on the gaming table

(http://data7.blog.de/media/420/6434420_f55929b64c_l.jpeg)

Cheers,

Craig
Title: Re: Starting up in 10mm
Post by: kev1964 on 06 February 2013, 08:01:22 PM
Excellent work craig, just thinking about ordering some of those.

kev
Title: Re: Starting up in 10mm
Post by: Last Hussar on 07 February 2013, 09:51:18 PM
I  use self adhesive floor tiles (B&Q  value range in the orange boxes).  I put paper on the sticky side then cut as needed.  Thinnest base I know, yet rigid.
Title: Re: Starting up in 10mm
Post by: HPFlashman on 05 July 2016, 01:59:07 PM
Time is on my side, yes it is.
Time is on my side, yes it is.
You're searching for good times but just wait and see, lead piles are forever...

Or some sort of nonsense.

Finally got to start of on the Sudanese fellows, I put the Madhist army pack on 32 sticks of 6 each, for a total of 192. Given them a white undercoat and will commence painting in earnest tomorrow.  TTT, Things Take Time.

Must order in square bases, have thoughts of either 6 figures or 4 figures pr base for either two or three bases pr unit (for starters).

Rules to be decided, probably Science vs Pluck and some sort single player thing to boost, most likely singleplayer rules will see the most action, would appreciate advice on that. Would like to have as high flexibility as possible.  :)
Title: Re: Starting up in 10mm
Post by: GrumpyOldMan on 05 July 2016, 07:19:49 PM
Hello HPF

Science vs Pluck is a good choice. You could also have a look at They Don't Like It Up 'Em ( TDLIUE) from the TooFatLardies  2008 Christmas Special. They're loosely based on rules from the Wargames Holiday centre and very similar to IABSM. Being card activated they are very suitable for solo play.

Cheers

GrumpyOldMan
Title: Re: Starting up in 10mm
Post by: HPFlashman on 05 July 2016, 08:08:43 PM
GOM, much obliged.

Got the ruleset of the Lardies website and had a quick browse, looks like it is just the ticket.  :-bd
Title: Re: Starting up in 10mm
Post by: Lord Kermit of Birkenhead on 06 July 2016, 02:08:22 PM
not bad, seen worse. (in Youkie mode today)

IanS
Title: Re: Starting up in 10mm
Post by: Leman on 06 July 2016, 03:27:47 PM
Will anyone else know what a yowkie is?
Title: Re: Starting up in 10mm
Post by: fsn on 06 July 2016, 04:20:32 PM
Chocolate bar favoured by truckers?
Title: Re: Starting up in 10mm
Post by: HPFlashman on 06 July 2016, 04:59:41 PM
Female Wokie?
Title: Re: Starting up in 10mm
Post by: Leman on 06 July 2016, 07:29:48 PM
No, it's someone from t'mill towns who goes t' foot of their stairs when Mr.Arkwright 'as trooble at t'mill. Eeh, by 'eck. Sometimes also referred to as a woollyback by scousers.
Title: Re: Starting up in 10mm
Post by: FierceKitty on 07 July 2016, 02:35:19 AM
I know how that bizarre descalambulatory idiom is used, but I wish someone would explain just why, and what its origins are (this doesn't mean class or geography). A bit like the American funky, when not used for a bad odour; no American has ever really given me a good explanation of what on earth it actually means, only where you say it.
Title: Re: Starting up in 10mm
Post by: Ithoriel on 07 July 2016, 12:32:05 PM
Quote from: FierceKitty on 07 July 2016, 02:35:19 AM
I know how that bizarre descalambulatory idiom is used, but I wish someone would explain just why, and what its origins are (this doesn't mean class or geography). A bit like the American funky, when not used for a bad odour; no American has ever really given me a good explanation of what on earth it actually means, only where you say it.

Funky means cool, strange, weird or smelly depending on context.

As in," The Pendraken Forum is funky, man!" :)