I have long wanted to add a windmill to my collection of terrain items and, at last, I finally got around to making one.
The first question was what type of windmill to make. From a European perspective, there are three main types of windmill, the post mill, the smock mill and the tower mill. Although smock and tower mills can be found as early as the seventeenth century and even earlier, the most widespread design seems to be the post mill with origins far back into history. Visually, the post mill is the most striking of the three provided that the trestle remains in clear view. My collections include WOTR, ECW, LOA, SYW and Napoleonics and I felt that a post mill would have the greatest versatility.
I split the construction into three sections: the trestle, the mill itself and the sails.
The Trestle
There was no real plan and the dimensions were arrived at in a rather freehand manner. However, to give an indication of scale, the cross-trees are 38mm across and the trestle, including the piers, stands 20mm high, not counting the cocktail stick jutting up to secure into the body of the mill section.
The cross-trees were made of balsa wood and are quite fragile once the joint has been cut, I snapped my first one and had to make a new piece. The post itself is also balsa wood.
(https://live.staticflickr.com/65535/55619779901_564362ab08_z.jpg) (https://flic.kr/p/2sJVUNr)Trestle 1 (https://flic.kr/p/2sJVUNr) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
The stone piers and the quarter-bars are made from scraps of blue foam which is easy to cut and carve.
(https://live.staticflickr.com/65535/55619752186_b0f03f78f7_z.jpg) (https://flic.kr/p/2sJVLyA)Trestle 2 (https://flic.kr/p/2sJVLyA) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
Before mounting the trestle on to the piers, I drilled a hole down through the post and pushed a cocktail stick through the assembly and into a hole drilled in base to provide greater strength.
Using Warhammer paints, the trestle was given a base coat of Dawnstone which was then successively dry-brushed with Administratum Grey, Corax White and Ushabti Bone. I have recently discovered Dawnstone and find that it gives a good base colour for any "old wood" that I'm trying to depict; I had previously used Mechanicus Standard Grey but found that it was too dark and I couldn't drybrush enough lighter greys over it to get a convincing "old wood" effect. The piers were painted Morghast Bone and washed with Agrax Earthshade. When this had dried I successively dry-brushed them with Morghast Bone, Ushabti Bone and Wraithbone. The base is painted with Dulux Tarragon Glory 2 and dry-brushed with Tarragon Glory 4. Sadly, my venerable tin of Tarragon Glory 2 had, after nearly 20 years, finally dried out; so I was pleasantly surprised, whilst browsing on-line, to discover that the Tarragon Glory range is still available. I was fortunate enough to have a Dulux Colour Centre nearby and they were able to mix me a fresh litre. I was warned that as current mediums and pigments are now more environmentally friendly, there might be a slight difference in colour. However, whilst I did note a small difference, it is so slight that you would not notice it unless you were intentionally looking for it. Once dry-brushed, I added grass tufts to add some interest and disguise the support post under the trestle.
The Mill
When I made my model of Leuthen church, I had a couple of unsuccessful attempts when making the tower. I utilised one of these "unsuccessful attempts" to form the body of the mill. The church tower had been 22mm square which meant that it was a bit slimmer than I really wanted for the mill, so I fattened it up by gluing pieces of 5mm thick blue foam to two sides of the square tower.
(https://live.staticflickr.com/65535/55619904448_6e154d1688_z.jpg) (https://flic.kr/p/2sJWxPN)Main Mill 1 (https://flic.kr/p/2sJWxPN) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
The height of the blue foam mill is about 50mm to the ridge of the roof. I found myself undecided about how tall I wanted the mill to be. After taking these photos, I cut a 5mm slice off the bottom to see how it looked, then had second thoughts and glued it back. Even now, I keep wondering "is it too tall?"
I then applied the weatherboards. When I did Leuthen church I didn't glue the rooftiles directly to the blue foam roof, it was far too messy. I cut a base card for the roof and glued the individual tiles to the base card and, once it had thoroughly dried, trimmed the tiles to neat edges and glued the whole assembly to the church roof. I decided to use the same method for the weatherboards.
I cut base cards for the front, rear and two sides (the card from an index card is about right) and then marked where the windows and the rear door were to go. The weatherboards were 3mm strips cut from a cereal box (a rotary cutter is very useful for this). Then came the laborious process of carefully gluing the weatherboards into place, each overlapping the board below, and leaving gaps for the door and windows. When finally completed, I weighted them down to keep them perfectly flat and left them to dry overnight. In the morning I used a sharp blade to trim the overhanging edges.
(https://live.staticflickr.com/65535/55619905008_34496c555a_z.jpg) (https://flic.kr/p/2sJWxZs)Main Mill 2 (https://flic.kr/p/2sJWxZs) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
Before gluing the weatherboard assemblies to the mill, I gently sanded the top of the front face to give the characteristic slope at the top where the sails are mounted. I then glued each assembly in turn, weighting it down and waited for it to dry. When all four sides were finally fixed in place I added a folded strip of the index card to each corner to tidy up the edges and give the appearance of the corner posts.
(https://live.staticflickr.com/65535/55618755552_ba5892b9bf_z.jpg) (https://flic.kr/p/2sJQEif)Main Mill 3 (https://flic.kr/p/2sJQEif) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
I had decided quite early in the process that my mill was going to be thatched rather than have wooden shingles. I glued a base of corrugated card to the roof to provide some bulk without adding too much weight. I then applied a coat of PVA glue and started to press on small sheets of DAS modelling clay (the PVA glue helps prevent the DAS from shrinking as it dries). Work the DAS quickly to cover one side with a thin coating of clay, remembering to work it round over the edges. Then, using a modelling knife, lightly score the DAS to create the straw effect. Repeat the process on the other slope and blend the ridge together. Without the corrugated card, the roof would have been solid DAS and would have made the model rather top-heavy.
I added window sills using slivers of blue foam and the door was made from a single piece of the same card used for the weatherboarding. I added the tail pole (used for turning the mill) using a cocktail stick; it is shorter and steeper than it really should be, but I didn't want to make the overall "footprint" too large. The final addition was a flight of steps up to the entry door. Whilst I was prepared to build the sails from scratch (see below), I drew the line at attempting to scratch build a staircase in 10mm, so I bought an N-scale staircase online from the Plastruct range. I also bought a couple of stepladders to keep in the 'spares' box.
As with the trestle, the mill was given a base coat of Dawnstone which was then successively dry-brushed with Administratum Grey, Corax White and Ushabti Bone. The windows were blocked in with The Fang and the door was painted with Mournfang Brown with stripes of XV-88 to simulate the planking. The thatch was washed with Agrax Earthshade and then successively dry-brushed with Karak Stone, Morghast Bone and Wraithbone.
The Sails
My original intention had been to use the grill from inside an ventilation brick cover to form the sails. However, the plastic proved to be a bit too thick and very difficult to cut. I also think it would have been quite heavy.
(https://live.staticflickr.com/65535/55619906768_25b364b6f4_z.jpg) (https://flic.kr/p/2sJWyvN)Sails 1 (https://flic.kr/p/2sJWyvN) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
After unsuccessfully looking for alternatives, I decided that I would have to make them myself. I used Evergreen plastic strip, 2.5mm x 1mm for the main arm and 1mm x 1mm for the framework. Each sail arm is 52mm long and the sails are 41mm x 12mm. I drew a plan for a sail on a piece of corrugated card and used pins to hold the strips in place whilst I carefully glued the cross pieces in place.
(https://live.staticflickr.com/65535/55619755756_dae42590bb_z.jpg) (https://flic.kr/p/2sJVMC9)Sails 2 (https://flic.kr/p/2sJVMC9) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
The individual sails were arranged as a cross and re-enforced back and front. The canvas sails were cut from paper and glued on to the frames. I opted for 'half-sails' and formed the furled canvas from Green Stuff. Looking at prints, it looks as if the furled canvas was looped through the framework. I'm not sure if this was to enable the sails to be trimmed more easily than if the sails were lashed to the main part of the sail arm.
(https://live.staticflickr.com/65535/55619966184_b0e9dfce91_z.jpg) (https://flic.kr/p/2sJWSbd)Sails 3 (https://flic.kr/p/2sJWSbd) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
As with the trestle and the mill, the sail framework was given a base coat of Dawnstone which was then successively dry-brushed with Administratum Grey, Corax White and Ushabti Bone. The canvas sails were painted with Ushabti Bone and dry brushed with Wraithbone.
(https://live.staticflickr.com/65535/55619905383_40192b1a09_z.jpg) (https://flic.kr/p/2sJWy6V)Completed Mill (https://flic.kr/p/2sJWy6V) by David Hockey (https://www.flickr.com/photos/204339433@N08/), on Flickr
The trestle, mill and sails are then ready to be assembled into the finished model. I found it easier to attach the sails to the main part of the mill and then, when that was fully dry, mount it on to the trestle.
Great looking windmill, and a great build write-up.
But given the complexity you have gone to, glad I bought the tower windmill from the Peninsular buildings range!
Serious bit of kit. Well done!
Lovely work and interesting to see how you went about making this 8) !
Really terrific work ! :-bd
Most excellent! :-bd
Looks great. I admit I am inclined to buy a 3D print in 10mm (I've got the Pendraken Spanish windmill anyway).
Edward