Pendraken Miniatures Forum

Wider Wargaming => Non-Pendraken Stuff => Topic started by: Duke Speedy of Leighton on 23 December 2023, 11:55:38 PM

Title: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: Duke Speedy of Leighton on 23 December 2023, 11:55:38 PM
Many years ago, I owned the original Kindred prototypes, but at somepoint I lost/traded/forgot. The only thing I could find was their tank, well, that's getting used! Recently, you may have seen my Sci-Fi crew, and looking through CP miniatures I found they were holding the Kindred. An order later and my Kindred are back! Love them.  :D
(https://i.imgur.com/sCa4oMg.jpg)

Sixteen figures, two anti-tank rocketeers with panzerschrecks, three Lewis gunners, an officer and ten soldiers.
(https://i.imgur.com/ly0vcsk.jpg)

Top view, 15mm bases, figures are close on 20mm. Yes, I kept the bases muddy and added wire, to go for the WW1 aesthetic.
(https://i.imgur.com/AFAT6mN.jpg)

Bare footed, but with putties...
(https://i.imgur.com/jisDS0b.jpg)

Packs packed and ready, most likey for Xenos Ramapant soon. Even the officer has a Lee Enfield.
(https://i.imgur.com/h8iuChn.jpg)

Might see how they do vs the club soon. Light or elite infantry?
(https://i.imgur.com/J6Ew3iT.jpg)

Something they did not have before was a HMG, that's now sorted.
(https://i.imgur.com/2sDDy6S.jpg)

How many rounds a minute! Support weapons are cool.
(https://i.imgur.com/tyLCwys.jpg)

Dakkadakkadakka
(https://i.imgur.com/Dwa8xti.jpg)

There was even something caught on the wire, adds nicely to the effect.
(https://i.imgur.com/0xI2xn7.jpg)
Title: Re: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: sunjester on 24 December 2023, 07:41:14 AM
Very nice Will. I have looked at these with interest before, for my VSF/Balkan Wars, but the helmets do not really fit in. Perhaps I'll have to go for some of the German goblins instead.
Title: Re: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: Duke Speedy of Leighton on 08 October 2026, 09:26:37 PM
Realising I did not have enough Kindred, I bought more!
I was getting 15 to make three squads of 10 in Xenos Rampant, but somehow, I don't know how, I ended up with 19 more. B)  O:-)  8->
(https://live.staticflickr.com/65535/55577010991_1cfbdb90c8_b.jpg)

Means I now have 34, plus HMG team, Fray Bentos the Tank and WWI Flying Ace Snoopy on top cover.
(https://live.staticflickr.com/65535/55577428600_04bc6cff9c_b.jpg)

Which should allow for some force variation
(https://live.staticflickr.com/65535/55577428595_781b3b88b1_b.jpg)

Still tempted by the German/Goblins too
(https://live.staticflickr.com/65535/55575981787_f8f8d31794_b.jpg)

Almost the right scale for Quar too.
(https://live.staticflickr.com/65535/55577428575_8eaf8529e2_b.jpg)

Question is, do I go for 28mm trench sections to fight over, or 20mm for these (and remember, I have no 20mm figures elsewhere in my collections, so 28mm might be more useful).
(https://live.staticflickr.com/65535/55577010976_6878652621_b.jpg)

Title: Re: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: fred. on 09 October 2026, 07:49:33 AM
As the earlier images have disappeared  (thanks Imgur) I'm not sure what Kindred are - they look pretty much like WWI British troops from late war?

Any way, like the way they look - and haven't you been a productive fellow lately?
Title: Re: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: fred. on 09 October 2026, 07:53:47 AM
As to trenches - they are a bit of a pain to get to work and look good for miniatures. 

Making them wide enough to get figures (and fingers) in, tends to mean they are very wide compared to real world ones. And you have the choice of do you make more revetment like ones that are much easier just to put on the table top, or ones that are sunk into the ground, which means generally raising up the level of the table. 

I bought two large sheets of high density foam for this - and beyond a small corner used for test pieces, I still have two large sheets of high density foam sitting in the corner several years later!

I would have thought 28mm trenches will be far too deep for these figures (and wide). But having a second set of trenches sounds excessive. One thought is to go with 28mm ones and make some kind of filler piece to go in the bottom to raise up the floor of the trench (can look like duck boards) to work better with these smaller figures
Title: Re: Kindred - 28mm Weird War I - Sci-Fi Halflings
Post by: Duke Speedy of Leighton on 09 October 2026, 08:00:48 AM
Quote from: fred. on 09 October 2026, 07:49:33 AMAs the earlier images have disappeared  (thanks Imgur) I'm not sure what Kindred are - they look pretty much like WWI British troops from late war?

Any way, like the way they look - and haven't you been a productive fellow lately?
Quote from: fred. on 09 October 2026, 07:49:33 AMAs the earlier images have disappeared  (thanks Imgur) I'm not sure what Kindred are - they look pretty much like WWI British troops from late war?

Any way, like the way they look - and haven't you been a productive fellow lately?

Thanks
Yes, WW1 halfling types. Bit of silliness.
It has been a productive week or three.