Pendraken Miniatures Forum

Welcome => Forum Info => Topic started by: Phil2 on 22 February 2022, 07:42:48 AM

Title: Please leave this thread alone.
Post by: Phil2 on 22 February 2022, 07:42:48 AM
Feel free to look....But please don't post anything.

My current doppelganger may appear....But that's all I'd like to see here.

Doing some testing for Sir.

Thanks - Phil.



Title: Re: Please leave this thread alone.
Post by: Phil2 on 22 February 2022, 07:47:36 AM
I can't see a delete button..even coming back after 2 minutes. :-\
Title: Re: Please leave this thread alone.
Post by: Phil2 on 24 February 2022, 02:10:35 PM
Well......The difference between looking at the forum and the tablet is something.

Using the tablet....It recognizes me as Phil2.....But I don't have the facility of marking 'all messages as read.'....I do with the PC.

Using my other 'Nom de plume'.....It doesn't recognize my password and says it will send an email to reset my password.....It frigging well doesn't. X_X .....Maybe be it will in a few hours.

Using the PC....Can get into both accounts....without messing around.

Now (next) for a  one line message from Phil2....and see if I've got a delete button, to get rid of it.

Title: Re: Please leave this thread alone.
Post by: Phil2 on 24 February 2022, 02:11:47 PM
I want to delete this.....But can I ?

No.....I could edit it....but there's no delete button...that's after 3 ? minutes.
Title: Re: Please leave this thread alone.
Post by: Phil2 on 24 February 2022, 02:16:17 PM
Well...I've edited it...But I can't delete it.
Title: Re: Please leave this thread alone.
Post by: Phil2 on 24 February 2022, 02:28:55 PM
Hey, ho!!.....I'll start again completely from scratch.

Leon  :-* ....If you would be so kind....delete both Phil2...and my alter ego....and I'll start from scratch with both of them.

Cheers - Phil. :)
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 26 February 2022, 03:27:14 PM
Still well unimpressed.

On the tablet (now)....took far too long to mark all messages as 'read'.

Title: Re: Please leave this thread alone.
Post by: Techno 3 on 26 February 2022, 03:28:52 PM
Still no obvious delete button...even after 2 minutes.
Title: Re: Please leave this thread alone.
Post by: Leon on 26 February 2022, 05:38:42 PM
I'm not sure how it appears on a tablet but the Delete button should be to the bottom right of a post where it says 'More', and then when you click/hover it shows 'Remove'.  Again though, I'm not sure how that looks on different devices and also how long it remains visible for on a regular account.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 28 February 2022, 07:18:20 AM
First go)... I'll give that a whirl, Leon.

First 'Modify') Hmmmm.....Unless I'm missing it....I can only see "Report to Moderator" or "Modify."
I'll have another look after I've saved this.

Second 'Modify') No.....Unless my eyes are playing really silly sods, I can't see 'delete'

Third....No clicking on 'More'.....Just gives the options mentioned in the 'First 'Modify' .
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 28 February 2022, 07:54:19 AM
Been waiting to.long, but no, shan't!
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 01 March 2022, 07:46:33 AM
I'm going to go into one of the threads that have you marked as Moderator, Will....Post something, and then see if you can delete it...well.... basically find a delete button.

Your Moderator 'flag' doesn't seem to be showing now..(It was before)..Though I'm sure I've seen you marked as moderator on certain boards.

My Mod functions are switched off to see how it behaves.

So far, so good.....I haven't seen any spurious posts, from the year dot, marked as unread.

I still can't see any delete button, even after just 2 minutes. :-\
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 01 March 2022, 07:50:58 AM
So what happens if I modify something, to give a completely blank post.
See what occurs with the next post.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 01 March 2022, 07:51:26 AM
Nah.....that doesn't work.....blanked the message but then I get ..

The message has the following error or errors that must be corrected before continuing:
The message body was left empty.
Title: Re: Please leave this thread alone.
Post by: Leon on 01 March 2022, 11:56:47 AM
Quote from: Techno 3 on 01 March 2022, 07:51:26 AMNah.....that doesn't work.....blanked the message but then I get ..

The message has the following error or errors that must be corrected before continuing:
The message body was left empty.

That's quite a standard thing, the message box can't be left completely empty so usually folks would leave a comma or full stop in there as a space filler.  I'd then spot that and delete the post.
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 01 March 2022, 12:30:56 PM
Quote from: Techno 3 on 01 March 2022, 07:46:33 AMI'm going to go into one of the threads that have you marked as Moderator, Will....Post something, and then see if you can delete it...well.... basically find a delete button.

Your Moderator 'flag' doesn't seem to be showing now..(It was before)..Though I'm sure I've seen you marked as moderator on certain boards.

My Mod functions are switched off to see how it behaves.

So far, so good.....I haven't seen any spurious posts, from the year dot, marked as unread.

I still can't see any delete button, even after just 2 minutes. :-\

I tried remove. That might work
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 01 March 2022, 12:39:30 PM
Where did you find the remove button, Will ?

All I've got underneath the message is a "Quote button" and a "More button"

I'll post this and come back 'toot sweet'.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 01 March 2022, 12:50:32 PM
Now...after the new post above....With this one, I can now see...

"Quote"
"Quick Edit"
"More..." Which now gives me "Modify" (Same as quick edit ??) and "Report to Moderator."

No "remove or delete" 8-}  8-}  gibber, gibber.

Am I looking in completely the wrong place ?



Title: Re: Please leave this thread alone.
Post by: Leon on 01 March 2022, 01:24:37 PM
I don't think you'll have the Delete option on your account level, just to stop folks from accidentally deleting things.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 01 March 2022, 02:16:43 PM
It's not on mine, suspect that it should only appear on members with Moderator permission. ATM Phil does not appear to be one, Will is.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 02 March 2022, 07:46:55 AM
No, Ian....My Mod facility is switched off at the mo'..to see whether I get less grief.

But...It never showed on my profile, even when it was switched on.
It seemed as though it was treating me as a cross between an Administrator and a Moderator, which was a bit odd.

Re. the delete/remove....Am I having a false memory, in that the 'old' forum allowed folk to modify or even remove posts..as long as they did it within 30 minutes, after posting.

Maybe folk could only modify their own posts during that time period ?

At least Will was able to completely remove the test post I put in on one of the boards he controls !

Have to go..got pretty retinal gloop spots flashing in my eyes at the mo'.
They'll be gone in an hour or so.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 02 March 2022, 08:39:33 AM
I can mod mine, and presumably remove - I'll check after this post
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 02 March 2022, 08:42:46 AM
Yep under the more button option to remove is there - goes modify, remove, report to mod. I suspect that it is both time limited and limited to the author, if that's the case the last is a tad redundant !
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 02 March 2022, 09:55:25 AM
I'll check to see whether that's there......Boggered if I could see it yesterday.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 02 March 2022, 10:01:09 AM
Nope....Just Modify & Report to Moderator.

Aha !......I wonder whether 'Playtester' gives you some extra facilities, Ian. :-\

I'll ask Leon to put me back to Global...and have another Doppelganger persona, which I'll just leave as just a member of the Forum.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 02 March 2022, 10:46:46 AM
Checking again
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 02 March 2022, 10:58:15 AM
Hopefully this works

It didnt, was trying to paste a print screen in.
Title: Re: Please leave this thread alone.
Post by: Leon on 02 March 2022, 12:01:33 PM
I've bumped you to Playtester and Team Pendraken, see if that makes a difference?

Quote from: Lord Kermit of Birkenhead on 02 March 2022, 10:58:15 AMIt didnt, was trying to paste a print screen in.

The forum won't take a straight paste of any image, it always needs to be hosted somewhere.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 02 March 2022, 01:07:53 PM
Thanks Leon. Pushing more buttons on Phils last post I can report to moderator but not edit or remove it.
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 02 March 2022, 10:00:46 PM
I canonly report this one to a.miderator...
Prod prod prod poke
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 03 March 2022, 03:45:10 PM
For now...I'm not going to ask Sir to re-instate me to Global Mod.....This one can stay as an ordinary member for now.)

To me...There's something(s) (still) VERY squiffy on the new forum.

(I will NOT lose my temper again.....I will NOT lose my temper again...I will not lose my temper again...Pah !!....I probably will... :P  :P  :P  ;D  ;D  ;D )



Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 03 March 2022, 03:59:56 PM
Quote from: Techno 3 on 03 March 2022, 03:45:10 PM(I will NOT lose my temper again.....I will NOT lose my temper again...I will not lose my temper again...Pah !!....I probably will... :P  :P  :P  ;D  ;D  ;D )


OH YES YOU WILL !!!!
Title: Re: Please leave this thread alone.
Post by: Leon on 03 March 2022, 06:42:41 PM
Quote from: Techno 3 on 03 March 2022, 03:45:10 PMTo me...There's something(s) (still) VERY squiffy on the new forum.

(I will NOT lose my temper again.....I will NOT lose my temper again...I will not lose my temper again...Pah !!....I probably will... :P  :P  :P  ;D  ;D  ;D )

I think we need to work out what the different membership levels are allowed to do, as you might be looking to do things that nobody else can do either.  I think we've confirmed that regular members can't delete their posts, but they can Modify them within a certain timeframe.  Mods can also Modify (as Will confirmed) but did we work out whether they can delete as well?
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 04 March 2022, 08:07:20 AM
Hi, Leon. :)

I'm just about to do a new registration for 'Doppelganger'

If you want to put me back on Mod duties for Techno, I'll leave Doppelganger as a plain member.... and then I can have a bit more of a 'play'. :).
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 04 March 2022, 09:13:18 AM
Phil you will probably need to use another email address.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 04 March 2022, 11:45:45 AM
Already done, Ian......Hotmail addy, as well as the Gmail one, now.




Title: Re: Please leave this thread alone.
Post by: Techno 3 on 07 March 2022, 08:02:34 AM
OK.....So this seems to be working OK.

See if I can find modify/delete, now.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 07 March 2022, 08:07:11 AM
Yep...That's there now.

And I can see the Global Mods board....So that bit's obviously working.

Now to come back as Doppelganger..(on the tablet).....Logout here first. :D
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 07 March 2022, 08:11:18 AM
Welcome to the forum, me.

Can modify.....but not remove, under the 'more' button......So that ISN'T there, even after a couple of minutes.

Title: Re: Please leave this thread alone.
Post by: Doppelganger on 07 March 2022, 08:20:29 AM
Logout
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 07 March 2022, 09:00:55 AM
Quote from: Doppelganger on 07 March 2022, 08:20:29 AMLogout
hello
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 08 March 2022, 07:34:11 AM
Still seems to be behaving itself. :)
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 08 March 2022, 07:36:43 AM
And for my 'twin'.

Title: Re: Please leave this thread alone.
Post by: Steve J on 08 March 2022, 01:45:06 PM
Anyone else suddenly have to Login today? I'm signed in as Forever on the time front, so a tad confused. Also the latest releases info used to be on the right hand side, now it's on the left. Also the emojis have disappeared...
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 08 March 2022, 01:59:29 PM
I did and yes the emojis seem to be AWOL.
Title: Re: Please leave this thread alone.
Post by: Steve J on 08 March 2022, 03:30:36 PM
I'm glad it's not just me then Ian!
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 08 March 2022, 05:26:25 PM
Yup, sign in and no emojis here! :(
Title: Re: Please leave this thread alone.
Post by: Leon on 08 March 2022, 06:03:48 PM
The webguy was tweaking some settings this morning so I'll check and see if something's gone squiffy.
Title: Re: Please leave this thread alone.
Post by: Ben Waterhouse on 08 March 2022, 10:56:09 PM
Just had to sign in again...
Ben
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 09 March 2022, 07:49:10 AM
I always sign in..so hadn't noticed that....But no emojis showing.

Title: Re: Please leave this thread alone.
Post by: Techno 3 on 09 March 2022, 07:52:04 AM
Hmmm.....Something a bit squiffy with 'Preview', too.

Didn't want to show an updated version of the post above, after I changed it. Though it seems to have gone in correctly now.
Title: Re: Please leave this thread alone.
Post by: Raider4 on 09 March 2022, 09:32:05 AM
Quote from: Techno 3 on 09 March 2022, 07:49:10 AM. . . no emojis showing.

Same here. And no text options - bold, italic, size, etc. - at all.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 09 March 2022, 09:41:49 AM
Likewise, only just noticed the lack of formating. Looks like it's develoed a major case of lurgi.
Title: Re: Please leave this thread alone.
Post by: Leon on 09 March 2022, 11:38:07 AM
You try and fix one thing...  The webguy is on it and we'll get the formatting options back.
Title: Re: Please leave this thread alone.
Post by: John Cook on 10 March 2022, 02:03:34 AM
The quick edit facility doesn't seem to be working
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 10 March 2022, 07:01:12 AM
Just a test post.....

 Still no emojis, or formatting options....Preview seems to have gone as well.
See whether this will actually post.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 10 March 2022, 07:03:12 AM
Yes :-)

Quick edit seems to be back....Though maybe that's because Techno 3 is a moderator.
I'll try Doppelganger.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 10 March 2022, 07:06:50 AM
Quick edit shows but doesn't work.....and I haven't got a drop-down, allowing me to logout......I'll just use 'X'.

Oooh...preview's back.
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 10 March 2022, 07:08:16 AM
Testing.
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 10 March 2022, 07:10:10 AM
Testing again.

Preview still working.
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 10 March 2022, 07:11:49 AM
But not quick edit.

I guess the web guy is working on it !!
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 11 March 2022, 07:33:03 AM
Testing.

What's happening it doing with the message icons atm ?

Title: Re: Please leave this thread alone.
Post by: Techno 3 on 11 March 2022, 07:35:05 AM
Preview doesn't seem to work properly.

Change something before posting, and it doesn't show in preview...though it seems to post the altered message.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 12 March 2022, 08:41:35 AM
Still no emojis ?

Checking preview.
Hmmm. still doesn't actually show additions if you add anything after you've previewed it before.
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 12 March 2022, 08:45:07 AM
...and no drop down menu, under the logged in name.

No preview at all, at the mo'.

Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 12 March 2022, 09:33:42 AM
I get previews button, but no actual Andrew Preview
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 12 March 2022, 10:51:32 AM
Exactly what I got as Doppelganger, Will...

Yes...can see and click on the button...but nowt happens. (At the mo')
Earlier....As Techno 3.....The preview button was there (and worked)....BUT...when I went back into the message text, and added a line, before posting, 'preview' didn't show the new line...Though it came through when I hit 'POST'.

Ooh...'Preview' is half working as I type.

To misquote the start of 'Money for Nothing'.


"I want my..
 I want my ee-mo-gees.'
Title: Re: Please leave this thread alone.
Post by: fred. on 12 March 2022, 10:58:46 AM
Just a test


Preview seems to work for me - but I never normally use it - so not quite sure what to expect



Quick Edit doesn't work for me - just click the button nothing happens
Modify works fine
No buttons for formatting, images etc show though
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 12 March 2022, 05:35:28 PM
Sigh.

Well...I've finally got two avatars in..

Nothing, much else seems to be playing properly.










Title: Re: Please leave this thread alone.
Post by: Techno 3 on 13 March 2022, 06:52:59 AM
Testing.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 13 March 2022, 06:59:35 AM
Interesting.....

Before I went in to post the above message...I COULD get at the drop down menu under Techno 3, in the top left corner.
That facility seemed to disappear the moment I went to 'Post reply.'...and while Preview was there for the above.....That's disappeared too, now.
Title: Re: Please leave this thread alone.
Post by: Steve J on 13 March 2022, 07:31:42 AM
No drop down menu for me when viewing this topic Phil. To be honest I'd forgotten it even existed! Preview seems to be working though.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 13 March 2022, 03:32:05 PM
Hi, Steve.

Preview WAS working..... but only for the the FIRST attempt at writing in the quick reply. (I'm checking this now.)....Ignore the capitals, there still doesn't seem to be any formatting options.

$Yep...that's fine..but checking to see if it works, now I've added this line.$......between the dollar signs.
Nope..but I'll bet this will actually post OK.
Back as Doppelganger, in a mo'

Title: Re: Please leave this thread alone.
Post by: Doppelganger on 13 March 2022, 03:38:37 PM
Yep...that worked..as to what I posted as Techno.....The whole lot.

Drop-down was there......

And has now disappeared, after coming back in, after the line above....Ditto preview....But I'm sure this message will all appear when I hit 'POST'.

Title: Re: Please leave this thread alone.
Post by: Doppelganger on 13 March 2022, 03:39:29 PM
Yep..it did.
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 13 March 2022, 03:43:22 PM
Bloomin' heck...The drop-down menu came back for a few moments...and has now bogged off, again.

I'm getting a headache.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 14 March 2022, 09:26:08 AM
2 Paracetimol. 3 days away, still no formating or emojies
Title: Re: Please leave this thread alone.
Post by: stormrider on 16 March 2022, 11:20:55 AM
Good news everybody!

:)  ;)  :D  ;D  >:(  :(  :o  8)  ???  :-[  :-X  :-\  :-*  :'(  :d  =)

Hopefully you should now all see emojis and formatting information. Turns out SMF has some very interesting ways of handling settings, you can't just change something in 1 place and have it all pull from there - it's in every bloody record everywhere... If you see anything else acting up, or things are still iffy please let me know (screenshots if possible) and I'll do my best to wrangle the beast!

Stewart
AKA the webguy
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 16 March 2022, 11:28:22 AM
In deed I can  :d  :d  :D  ;)  :)  :'(  :'(  :'(
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 19 March 2022, 11:27:41 AM
As far as I, and my alternate ego, can tell....Things seem to be behaving themselves.
HUZZAH! :-bd

Cheers - Phil.
Title: Re: Please leave this thread alone.
Post by: Leon on 19 March 2022, 09:40:23 PM
Quote from: Doppelganger on 19 March 2022, 11:27:41 AMAs far as I, and my alternate ego, can tell....Things seem to be behaving themselves.
HUZZAH! :-bd

That's good to hear!
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 20 March 2022, 07:24:54 AM
Quote from: Doppelganger on 19 March 2022, 11:27:41 AMAs far as I, and my alternate ego, can tell....Things seem to be behaving themselves.
HUZZAH! :-bd

Cheers - Phil.

Even you Phil ?  =O  =O  =O
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 20 March 2022, 08:43:24 AM
Apparently, Ian !!  :o  :o  :o
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 21 March 2022, 11:28:53 AM
Prod. Poke. Jiggle...


Tick... tick...
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 21 March 2022, 02:27:31 PM
Just don't, Will. :P

As I now have the facility....I think I might up Techno 3's number of posts....up to the number I had previously got to.

Don't worry, Leon...I won't try that !!
That probably would break something.




Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 21 March 2022, 03:16:37 PM
Phil - DONT TOUCH ANYTHING !!!!
Title: Re: Please leave this thread alone.
Post by: Doppelganger on 21 March 2022, 03:19:01 PM
NAH !!

At least my Ukrainian flag has turned up.....FINALLY !
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 21 March 2022, 03:31:45 PM
It should be above the Welsh one !
Title: Re: Please leave this thread alone.
Post by: fsn on 21 March 2022, 05:54:21 PM
(https://nypost.com/wp-content/uploads/sites/2/2022/03/Screen-Shot-2022-03-16-at-5.17.35-PM.png)

Spot the deliberate mistale.
Title: Re: Please leave this thread alone.
Post by: mollinary on 21 March 2022, 06:24:11 PM
Flag is upside down!
Title: Re: Please leave this thread alone.
Post by: fsn on 21 March 2022, 06:32:38 PM
 :D
Title: Re: Please leave this thread alone.
Post by: Raider4 on 21 March 2022, 07:29:25 PM
Well, an upside-down flag is a sign of distress.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 20 April 2022, 06:50:52 AM
Hmmmm....I now wonder if some of MY glitches have been caused by my broadband from time to time. Definitely had some problems over the last few weeks..and pinned it down to my 'hub', which was having hissy fits....Nice chap at the repair centre found faults on it, and cleared those remotely. Engineer came round yesterday and checked EVERYTHING..which is now working well.
Checked with BT sales, and we've now got an order for 'full fibre'. (For an extra £1.40 a month, a definite no brainer...So now waiting for the engineers to come round an put in a new drop wire. (Hopefully in the next fortnight.)
We know we won't get the absolute FULL benefits of fibre, until the whole area is done....But that will be an automatic upgrade, at no charge sometime in the future.
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 20 April 2022, 07:24:36 AM
 8)
More shredded wheat for you then...
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 20 April 2022, 07:54:14 AM
Been on full fibre for a while. Has crashed once, laptop then tried to connect via printer....Took a minute or two to realise that.

PS we seem to have ignored the title for this thread..,.
Title: Re: Please leave this thread alone.
Post by: Techno 3 on 20 April 2022, 11:39:30 AM
Doesn't matter anymore, Ian....I only wanted folk to steer clear at the start so I could do a number of tests comparing Techno 3 (as a Global Mod) and Doppelganger, as a plain member of the forum.
Title: Re: Please leave this thread alone.
Post by: Lord Kermit of Birkenhead on 20 April 2022, 12:11:54 PM
Quote from: Techno 3 on 20 April 2022, 11:39:30 AMDoesn't matter anymore, Ian....I only wanted folk to steer clear at the start so I could do a number of tests comparing Techno 3 (as a Global Mod) and Doppelganger, as a plain member of the forum.

I 'ad guessed ! :d
Title: Re: Please leave this thread alone.
Post by: GrumpyOldMan on 20 April 2022, 10:00:16 PM
QuoteDoesn't matter anymore.

(https://media.tenor.co/images/9cda779609e3b95a3e3ffb63691b3bd1/raw)
Title: Re: Please leave this thread alone.
Post by: Duke Speedy of Leighton on 21 April 2022, 05:56:15 PM
Prod