Painting

Started by chalkie, 21 August 2013, 11:50:06 AM

Previous topic - Next topic

chalkie

Hi, wondering if you could help . I ve never painted 10 mm before and I've been out the game for a long time, how do you get the dark outlines on your figures ? I've never tried washes before, don't know why but I've seen the photos of the AWI figures and that's what Iam after. Is there anything else I can use / do to get this effect. Sorry for the daft questions.

Paul.

Fenton

I think most of the pictures your mentioning are undercoated in black and the black effect is done by making sure yoiu leave a thin black line  between the various colours. to my mind a black wash doesn't have the same effect
If I were creating Pendraken I wouldn't mess about with Romans and  Mongols  I would have started with Centurions , eight o'clock, Day One!

get2grips

21 August 2013, 12:19:04 PM #2 Last Edit: 21 August 2013, 12:38:18 PM by get2grips
Quote from: chalkie on 21 August 2013, 11:50:06 AM
Hi, wondering if you could help . I ve never painted 10 mm before and I've been out the game for a long time, how do you get the dark outlines on your figures ? I've never tried washes before, don't know why but I've seen the photos of the AWI figures and that's what Iam after. Is there anything else I can use / do to get this effect. Sorry for the daft questions.

Paul.

Okay, I'm probably going to get shot down in flames here but I'll go out on a limb.  The easiest way to start is to black undercoat and then dry brush in your base colour.  So, let's say it's a knight, silver, chainmail or whatever.

If you do this right you'll create a "black line" in and around all the recesses.  You can then paint up to this which means you don't have to black line at the end.

A wash, when you've finished your block painting will "tie" the whole thing together ready for final highlights.

Any use?

chalkie

Both replies are of use , never tried the dry brush effect but will give it a go and see which is best for me.

Thanks lads,

Paul.

get2grips

Quote from: chalkie on 21 August 2013, 01:07:52 PM
Both replies are of use , never tried the dry brush effect but will give it a go and see which is best for me.

Thanks lads,

Paul.

No worries Paul and welcome to the forum  :)

What are you looking to paint?

chalkie

I've ordered some British AWI for my son but I will get to paint them. I've always done 15mm.

get2grips

Quote from: chalkie on 21 August 2013, 01:48:58 PM
I've ordered some British AWI for my son but I will get to paint them. I've always done 15mm.

Post this as AWI painting and you'll get some really specific responses  :)

Good luck  ;)

sixsideddice

affect can also be achieved (to greater or lesser degrees... but very simple to do) by dripping a coat of ink of similar colour over the desired area that is already painted.

Six  :)

sebigboss79

There is no daft questions in gaming, with the exception of any question about Centurions  :d

Scales of 10 - 3mm (yes I game THAT small) require no special skills just a rethinking of techniques.
In short:

-more brushing
-brighter colours than you would use at 15mm+

For most of us the single layer over basecoat works fine. Don't forget you are playing MASSES where individual shortcomings are replaced by the mass effect. If you require eyelashes I recomend asking nikharwood here on the forum.

Concerning basing I recomend you do that first and finish your base including flock etc. and secondly I suggest getting good quality sand and flock from Pendraken. I have realised some stuff is too "coarse" wheras the Pendraken offerings are fine for even my 3mm armies. @Leon I assume an order coming through from the gentleman, you know where I live so cheques made payable to my name  ;D

Leman

21 August 2013, 08:48:42 PM #9 Last Edit: 21 August 2013, 09:30:38 PM by Leon
I find 10mm easier to paint than 15mm because you don't need so much detail. Consequently units are completed more quickly and gaming can begin. I use a slightlyndifferent technique - undercoat white, wash with black, block paint bright colours, wash with sepia, highlight. The next bit is quite time consuming but 2 coats of varnish and well produced bases really finish a figure off:



EDIT: Pic resized.
The artist formerly known as Dour Puritan!

chalkie

Thanks to all of you for your comments, I have some really good tips now so just waiting for the figures to arrive then I will get started.

"watch this space "

Paul.

Lord Kermit of Birkenhead

Quote from: sebigboss79 on 21 August 2013, 03:07:56 PM
There is no daft questions in gaming, with the exception of any question about Centurions  :d [\quote]

Got to rise to that challenge - so What colour crest did a Marian Centurion wear on his helmet ?

IanS

FOG IN CHANNEL - EUROPE CUT OFF
Lord Kermit of Birkenhead
Muppet of the year 2019, 2020 and 2021

chalkie

Well the figures came today and they are cracking , I will have a go at painting a few and post them on here later. :)

Leman

The artist formerly known as Dour Puritan!

Leon

Quote from: chalkie on 22 August 2013, 02:31:41 PM
Well the figures came today and they are cracking , I will have a go at painting a few and post them on here later. :)

8)
www.pendraken.co.uk - Now home to over 10,000 products, including nearly 5000 items for 10mm wargaming, plus MDF bases, Battlescale buildings, I-94 decals, Litko Gaming Aids, Militia Miniatures, Raiden Miniatures 1/285th aircraft, Red Vectors MDF products, Vallejo paints, Tiny Tin Troops flags and much, much more!